Application Guide

Legends
  • Product CodeA591M509M543M545M593N520N530N560S1359S1356SE
    Backing / AppearanceBuff CreamTranslucentTranslucentTranslucentBlackTranslucentTranslucentTranslucentTranslucentLight Beige
    Adhesive TypeRubber NatRubber SolvMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylAcryl. Disp.Acryl. Disp.
    Gauge mm0.180.0950.180.0950.0950.150.0950.120.170.3
    Temp Continuous °C0 to 60-15 to 60-20 to 130-20 to 130-20 to 130-20 to 120-20 to 120-20 to 100-40 to 140-40 to 140
    Peel Adhesion N/Cm2.24.87.410.57.4>7.1>7.1>9.810.88.8
    Liner TypeSil.PaperPE PaperSil.PaperPE PaperPE PaperPE PaperPE PaperPE PaperSil.PaperPE Paper
    Liner ColourWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteAmberAmber
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand Tearable
    Economy
    TYPICAL
    APPLICATIONS
    Golf Grip Tape
    Applicator
    Fluid Available
    Print Finishing
    Laminating and
    Splicing, Paper
    Foam Lamination
    Econ Pre-Stitch
    Print Finishing
    Mounting,Name-
    Plate (Trophies)
    Bonding Fabrics
    Lamination of
    Foams & Splice
    Identification
    Graphics
    Lamination Splicing
    Picture Framing
    Flying Splice
    Curtain and Blind
    Lamination
    Premium Grade
    Highly Textured
    Surfaces
    EPDM & Foam
    Lamination
    Textured Surfaces
    Meets FAR25.853
    Flame Retardent
    Auto & Aircraft
  • Product CodeFast FixerB300B313B333U1712S1325S1328S1375S1377
    Backing / AppearanceClear DotATG Trans.ATG Trans.ClearTranslucentTranslucentTranslucentClearClear
    Adhesive TypeHot MeltMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylPure AcrylPure Acryl
    Gauge mm0.170.12Ca. 0.50.040.130.040.120.060.12
    Temp Continuous °C0 to 50-20 to 130-20 to 130-30 to 75-40 to 120-40 to 150-40 to 150-40 to 170-40 to 170
    Peel Adhesion N/CmVariable3.4152.5/1.19.81011.67.28.8
    Liner TypeSil.PaperSil.PaperSil.PaperSil.PaperPE PaperPE Paper PRPE Paper PRPE Paper PRPE Paper PR
    Liner ColourL. BlueAmb. Rev.Amb. Rev.WhiteKraftKraftKraftKraftKraft
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand TearableNANANANA
    Economy
    TYPICAL
    APPLICATIONS
    Adhesive Glue Dot
    For Mailings Gift
    and Promotions
    Print Finishing
    Picture Framing
    Point of Sale
    As for B300 Plus
    Splice and Mount
    Textured Finishes
    Point of Sale
    Temporary
    Mounting
    Nameplate, Trim
    Curtains & Blinds
    Decorative Moulds
    Nameplate Signs
    Screen printing,
    Low Surface Energy
    As for S1325 but
    For Rougher
    Textured Surfaces
    Lamination to
    Foams, Textiles
    Name Plate
    As for S1375 but
    For Rougher
    Textured Surfaces
  • Product CodeH666S1338S1489
    Backing / AppearanceTranslucentTranslucentTranslucent
    Adhesive TypeRubber Solv.Pure AcrylRubber Syn.
    Gauge mm0.190.220.25
    Temp Continuous °C-40 to 65-40 to 140-40 to 70
    Peel Adhesion N/Cm261018.8
    Liner TypeSil.PaperSil.PaperSil.Paper
    Liner ColourAmberAmberAmber
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand Tearable
    Economy
    TYPICAL
    APPLICATIONS
    Weatherstrips,
    Gaskets, Bonding
    of Cloths & Foams
    Attachment of
    Skirting Boards
    Decorative Moulds
    Bonding Low
    Energy Plastic
    & Rubber Profiles
  • Product CodeS1435S1362K330K5325K5300S1360SE
    Backing / AppearanceCreamTranslucentWhiteBeigeWhiteTranslucent
    Adhesive TypeRubber Syn.Acrylic DispDiff. Rub. Syn.Rubber Nat.Rubber Syn.Acrylic Disp
    Gauge mm0.220.290.240.410.350.28
    Temp Continuous °C-20 to 70-20 to 100-10 to 70-10 to 50-10 to 60-40 to 100
    Peel Adhesion N/Cm82.8/6.03.3/5.73.9/4.74.7/7.06.4
    Liner TypeSil.PaperSil.PaperPE PaperPE PaperPE PaperSil.Paper
    Liner ColourAmberWhiteWhiteWhiteWhiteWhite
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand Tearable
    Economy
    TYPICAL
    APPLICATIONS
    FR Carpet Tape
    Aviation and
    Marine
    Exhibition temporary
    Display, Drape
    Mounting
    Econ Carpet Tape
    General Purpose
    Splicing, low Energy
    Approved For
    Exhibition Floors
    & General Dsiplay
    Joining PE Sheet
    Signage/Display
    TV & Film Studios
    Platemount
    Corflute & Corex
    Signage & Display
  • Product CodeS1453LTM304S1-200U300H310S1397S1398AT320S1392U3525ZU910
    Backing / AppearancePP Trans.PET ClearUPVC ClearPET ClearPET ClearPET ClearPET V. ClearPPVC BlueUPVC WhitePP ClearPET Clear
    Adhesive TypeSyn. RubberMod. AcrylAcryl. Emul.Mod. AcrylMod. AcrylMod. AcrylMod. AcrylAcryl. Emul.Mod. AcrylSolventlessAcryl/Sil
    Gauge mm0.10.070.080.120.070.210.210.180.260.250.11
    Temp Continuous °C-40 to 70-20 to 1400 to 90-20 to 110-20 to 110-40 to 160-40 to 160-5 to 70-40 to 70-20 to 100-10 to 120
    Peel Adhesion N/Cm10.45.73.26.8/3.410.5/1.416167189.44.7/7.8
    Liner TypeSil.PaperPE PaperWPE PrintSil.PaperSil.PaperSil.PaperMOPPSil.PaperSil.PaperMOPPSil. Paper/PE x 2
    Liner ColourAmberWhiteWhiteWhiteWhiteAmberRed/PinkWhiteAmberRed/PinkWhite/Clr
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand Tearable
    Economy
    TYPICAL
    APPLICATIONS
    Lamination to
    Foams & Boards
    Point of Sale
    Laminating
    Splicing & Light
    Assembly Work
    Stationery,
    Print Finishing
    Mailing/Assembly
    Advertising, P.O.S.
    Display, Banners
    Re-positionable
    Advertising, P.O.S.
    Display, Clean
    Remove
    Trim Mounting,
    Acrylic Bonding
    Signage & Display
    As For S1397 But
    Non-Tear Liner
    Data Strip Mount
    Flooring Tape
    For Vinyl & PVC
    Foam, Displays
    Point of Sale
    Plastic Profiles
    Badge & Nameplate
    Nameplate
    Edge Trim Skirt
    Mounting
    Mounting Silicon
    Rubber, Splicing
    LSE Surfaces
  • Product CodeS1PFO1FRW10S1812S1819FAW30S1852N592S1822S1824U394Ff164
    Backing / AppearancePPVC WhitePE WhitePE WhitePE WhitePE WhitePE/Pet WhitePE BlackPE BlackPE BlackPE D GreyPVC White
    Adhesive TypeMod. Acryl.Rubber Solv.Mod. Acryl.Mod. Acryl.Mod. Acryl.Mod. Acryl.Mod. Acryl.Mod. Acryl.Acryl PureMod. Acryl.Acryl
    Gauge mm10.111.12.13.121.20.51.10.953.11.5
    Temp Continuous °C-10 to 80-30 to 80-40 to 80-40 to 100-40 to 80-40 to 80-40 to 80-40 to 80-40 to 125-40 to 70-40 to 70
    Peel Adhesion N/Cm5.8>7.2 Tear>7.2 Tear>7.2 Tear>7.0 Tear>7.0/2.012.2>7.2 Tear8>7.24.8
    Liner TypePE PaperSil Paper PrSil PaperSil PaperSil PaperSil PaperPE FilmicPE FilmicPE FilmicPE FilmicPE Paper
    Liner ColourL YellowWhiteWhite PrtWhite PrtWhiteWhiteRed/PinkGreenGreenRedWhite
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand Tearable
    Economy
    TYPICAL
    APPLICATIONS
    Cable Trunking
    G.P. Mount Hangers
    Hooks and Signs
    Corflute Corex MDF
    Mirror Mount
    Display Panels
    Shopfitting, Plastic
    Moulders Display
    & Signage
    Mirror Mounting
    External Signs
    Bathroom Fittings
    Dust, Draft, Gap
    Sealing, Panel &
    Component Mount
    Advertising, P.O.S.
    Exhibition and
    Display
    Badgemount
    Nameplate Inserts
    and Trim
    Auto After
    Market Badge &
    Trim Mounting
    OEM Grade Badge
    & Trim Mounting
    Wheel Weights
    Auto After Market
    Double Glazing
    Closure
    Point Of Sale
    Merchandising
    Perm & Tem Mount
  • Product CodeT7025CT705CT710CT720CT711WXT720WT723WMT706WLT711WLT708GXT716GXT723GXT711BDXT608BRT9025
    Backing / AppearanceClearClearClearClearWhiteWhiteWhiteWhiteWhiteGreyGreyGreyBlackClearWhite
    Adhesive TypeSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventless
    Gauge mm0.250.5121.122.30.61.10.81.62.31.10.80.25
    Temp Continuous °C-30 to 150-30 to 150-30 to 150-30 to 120-30 to 130-30 to 120-30 to 120-30 to 90-30 to 90-30 to 120-30 to 120-30 to 120-30 to 120-30 to 130-30 to 120
    Peel Adhesion N/Cm1011131521.125.1161721.919.52225221.210.5
    Liner TypePE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicSil. Paper
    Liner ColourRedRedRedRedRedL BlueRedGreenGreenRedRedRed PrintRedL BlueWhite Print
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand Tearable
    Economy
    TYPICAL
    APPLICATIONS
    Mounting Glass &
    Clear Plastics,
    Display Fabrication
    Signs and Displays
    Acrylic & Glass
    Fabricators
    Acrylic, Glass
    Plastic Bonding
    Signage & Display
    Glass and
    Showerscreen
    Illuminated Signage
    Shopfitting
    Panel Bonding
    Signs, Electronics
    Panel Bonding &
    Mounting Metal
    Fabrication
    Mounting ACP
    Structural
    Bonding Signage
    Sign and Display
    Plastic
    Extrusions
    Signage Low
    Surface Energy
    Surfaces
    Coach Building
    Transport/ Marine
    Metal Fabrication
    Trim Mounting
    Structural Bonds
    Metal Fabrication
    Aluminium
    Composite Panel
    - Structural
    Mounting to Clear
    Surfaces, Graphics
    & Premium Signage
    Temporary Signage
    P.O.S. Exhibition
    Display
    Heat Sink Lighting
    and Electronics
    Switchboard
  • Product CodeK5901K5929K5930K5931K5932
    Backing / AppearanceOff WhiteBlackBlackBlackBlack
    Adhesive TypeButylButylButylButylButyl
    Gauge mm10.450.612
    Temp Continuous °C-30 to 80-30 to 80-30 to 80-30 to 80-30 to 8
    Peel Adhesion N/Cm17.69.19.810.513.6
    Liner TypePE PaperPE PaperPE PaperPE PaperPE Paper
    Liner ColourWhiteWhiteKraftKraftKraft
    Smooth Bond
    Non Smooth Bond
    Very Uneven
    Low Energy Surface
    Initial Tack
    Shear Adhesion
    UV Resistance
    Plasticiser Resistance
    Moisture Stability
    Chemical Resistance
    Differential Expansion
    Impact Resistance
    Ageing Resistance
    Clean Remove / Release
    Clarity
    Hand Tearable
    Economy
    TYPICAL
    APPLICATIONS
    Cold Storage
    Marine Gaskets
    Hydroponic Liners
    Moisture/Vapour
    Seals, attachment
    LSE Surfaces
    Waterproofing,
    Sealing, Roofing
    & Construction
    Membrane Repair
    Weather Proofing
    Joining PE Liners
    Road Traffic
    Markers, Sealing
    Vibration Proof
Product CodeA591M509M543M545M593N520N530N560S1359S1356SE
Backing / AppearanceBuff CreamTranslucentTranslucentTranslucentBlackTranslucentTranslucentTranslucentTranslucentLight Beige
Adhesive TypeRubber NatRubber SolvMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylAcryl. Disp.Acryl. Disp.
Gauge mm0.180.0950.180.0950.0950.150.0950.120.170.3
Temp Continuous °C0 to 60-15 to 60-20 to 130-20 to 130-20 to 130-20 to 120-20 to 120-20 to 100-40 to 140-40 to 140
Peel Adhesion N/Cm2.24.87.410.57.4>7.1>7.1>9.810.88.8
Liner TypeSil.PaperPE PaperSil.PaperPE PaperPE PaperPE PaperPE PaperPE PaperSil.PaperPE Paper
Liner ColourWhiteWhiteWhiteWhiteWhiteWhiteWhiteWhiteAmberAmber
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand Tearable
Economy
TYPICAL
APPLICATIONS
Golf Grip Tape
Applicator
Fluid Available
Print Finishing
Laminating and
Splicing, Paper
Foam Lamination
Econ Pre-Stitch
Print Finishing
Mounting,Name-
Plate (Trophies)
Bonding Fabrics
Lamination of
Foams & Splice
Identification
Graphics
Lamination Splicing
Picture Framing
Flying Splice
Curtain and Blind
Lamination
Premium Grade
Highly Textured
Surfaces
EPDM & Foam
Lamination
Textured Surfaces
Meets FAR25.853
Flame Retardent
Auto & Aircraft
Product CodeFast FixerB300B313B333U1712S1325S1328S1375S1377
Backing / AppearanceClear DotATG Trans.ATG Trans.ClearTranslucentTranslucentTranslucentClearClear
Adhesive TypeHot MeltMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylMod. AcrylPure AcrylPure Acryl
Gauge mm0.170.12Ca. 0.50.040.130.040.120.060.12
Temp Continuous °C0 to 50-20 to 130-20 to 130-30 to 75-40 to 120-40 to 150-40 to 150-40 to 170-40 to 170
Peel Adhesion N/CmVariable3.4152.5/1.19.81011.67.28.8
Liner TypeSil.PaperSil.PaperSil.PaperSil.PaperPE PaperPE Paper PRPE Paper PRPE Paper PRPE Paper PR
Liner ColourL. BlueAmb. Rev.Amb. Rev.WhiteKraftKraftKraftKraftKraft
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand TearableNANANANA
Economy
TYPICAL
APPLICATIONS
Adhesive Glue Dot
For Mailings Gift
and Promotions
Print Finishing
Picture Framing
Point of Sale
As for B300 Plus
Splice and Mount
Textured Finishes
Point of Sale
Temporary
Mounting
Nameplate, Trim
Curtains & Blinds
Decorative Moulds
Nameplate Signs
Screen printing,
Low Surface Energy
As for S1325 but
For Rougher
Textured Surfaces
Lamination to
Foams, Textiles
Name Plate
As for S1375 but
For Rougher
Textured Surfaces
Product CodeH666S1338S1489
Backing / AppearanceTranslucentTranslucentTranslucent
Adhesive TypeRubber Solv.Pure AcrylRubber Syn.
Gauge mm0.190.220.25
Temp Continuous °C-40 to 65-40 to 140-40 to 70
Peel Adhesion N/Cm261018.8
Liner TypeSil.PaperSil.PaperSil.Paper
Liner ColourAmberAmberAmber
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand Tearable
Economy
TYPICAL
APPLICATIONS
Weatherstrips,
Gaskets, Bonding
of Cloths & Foams
Attachment of
Skirting Boards
Decorative Moulds
Bonding Low
Energy Plastic
& Rubber Profiles
Product CodeS1435S1362K330K5325K5300S1360SE
Backing / AppearanceCreamTranslucentWhiteBeigeWhiteTranslucent
Adhesive TypeRubber Syn.Acrylic DispDiff. Rub. Syn.Rubber Nat.Rubber Syn.Acrylic Disp
Gauge mm0.220.290.240.410.350.28
Temp Continuous °C-20 to 70-20 to 100-10 to 70-10 to 50-10 to 60-40 to 100
Peel Adhesion N/Cm82.8/6.03.3/5.73.9/4.74.7/7.06.4
Liner TypeSil.PaperSil.PaperPE PaperPE PaperPE PaperSil.Paper
Liner ColourAmberWhiteWhiteWhiteWhiteWhite
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand Tearable
Economy
TYPICAL
APPLICATIONS
FR Carpet Tape
Aviation and
Marine
Exhibition temporary
Display, Drape
Mounting
Econ Carpet Tape
General Purpose
Splicing, low Energy
Approved For
Exhibition Floors
& General Dsiplay
Joining PE Sheet
Signage/Display
TV & Film Studios
Platemount
Corflute & Corex
Signage & Display
Product CodeS1453LTM304S1-200U300H310S1397S1398AT320S1392U3525ZU910
Backing / AppearancePP Trans.PET ClearUPVC ClearPET ClearPET ClearPET ClearPET V. ClearPPVC BlueUPVC WhitePP ClearPET Clear
Adhesive TypeSyn. RubberMod. AcrylAcryl. Emul.Mod. AcrylMod. AcrylMod. AcrylMod. AcrylAcryl. Emul.Mod. AcrylSolventlessAcryl/Sil
Gauge mm0.10.070.080.120.070.210.210.180.260.250.11
Temp Continuous °C-40 to 70-20 to 1400 to 90-20 to 110-20 to 110-40 to 160-40 to 160-5 to 70-40 to 70-20 to 100-10 to 120
Peel Adhesion N/Cm10.45.73.26.8/3.410.5/1.416167189.44.7/7.8
Liner TypeSil.PaperPE PaperWPE PrintSil.PaperSil.PaperSil.PaperMOPPSil.PaperSil.PaperMOPPSil. Paper/PE x 2
Liner ColourAmberWhiteWhiteWhiteWhiteAmberRed/PinkWhiteAmberRed/PinkWhite/Clr
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand Tearable
Economy
TYPICAL
APPLICATIONS
Lamination to
Foams & Boards
Point of Sale
Laminating
Splicing & Light
Assembly Work
Stationery,
Print Finishing
Mailing/Assembly
Advertising, P.O.S.
Display, Banners
Re-positionable
Advertising, P.O.S.
Display, Clean
Remove
Trim Mounting,
Acrylic Bonding
Signage & Display
As For S1397 But
Non-Tear Liner
Data Strip Mount
Flooring Tape
For Vinyl & PVC
Foam, Displays
Point of Sale
Plastic Profiles
Badge & Nameplate
Nameplate
Edge Trim Skirt
Mounting
Mounting Silicon
Rubber, Splicing
LSE Surfaces
Product CodeS1PFO1FRW10S1812S1819FAW30S1852N592S1822S1824U394Ff164
Backing / AppearancePPVC WhitePE WhitePE WhitePE WhitePE WhitePE/Pet WhitePE BlackPE BlackPE BlackPE D GreyPVC White
Adhesive TypeMod. Acryl.Rubber Solv.Mod. Acryl.Mod. Acryl.Mod. Acryl.Mod. Acryl.Mod. Acryl.Mod. Acryl.Acryl PureMod. Acryl.Acryl
Gauge mm10.111.12.13.121.20.51.10.953.11.5
Temp Continuous °C-10 to 80-30 to 80-40 to 80-40 to 100-40 to 80-40 to 80-40 to 80-40 to 80-40 to 125-40 to 70-40 to 70
Peel Adhesion N/Cm5.8>7.2 Tear>7.2 Tear>7.2 Tear>7.0 Tear>7.0/2.012.2>7.2 Tear8>7.24.8
Liner TypePE PaperSil Paper PrSil PaperSil PaperSil PaperSil PaperPE FilmicPE FilmicPE FilmicPE FilmicPE Paper
Liner ColourL YellowWhiteWhite PrtWhite PrtWhiteWhiteRed/PinkGreenGreenRedWhite
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand Tearable
Economy
TYPICAL
APPLICATIONS
Cable Trunking
G.P. Mount Hangers
Hooks and Signs
Corflute Corex MDF
Mirror Mount
Display Panels
Shopfitting, Plastic
Moulders Display
& Signage
Mirror Mounting
External Signs
Bathroom Fittings
Dust, Draft, Gap
Sealing, Panel &
Component Mount
Advertising, P.O.S.
Exhibition and
Display
Badgemount
Nameplate Inserts
and Trim
Auto After
Market Badge &
Trim Mounting
OEM Grade Badge
& Trim Mounting
Wheel Weights
Auto After Market
Double Glazing
Closure
Point Of Sale
Merchandising
Perm & Tem Mount
Product CodeT7025CT705CT710CT720CT711WXT720WT723WMT706WLT711WLT708GXT716GXT723GXT711BDXT608BRT9025
Backing / AppearanceClearClearClearClearWhiteWhiteWhiteWhiteWhiteGreyGreyGreyBlackClearWhite
Adhesive TypeSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventlessSolventless
Gauge mm0.250.5121.122.30.61.10.81.62.31.10.80.25
Temp Continuous °C-30 to 150-30 to 150-30 to 150-30 to 120-30 to 130-30 to 120-30 to 120-30 to 90-30 to 90-30 to 120-30 to 120-30 to 120-30 to 120-30 to 130-30 to 120
Peel Adhesion N/Cm1011131521.125.1161721.919.52225221.210.5
Liner TypePE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicPE FilmicSil. Paper
Liner ColourRedRedRedRedRedL BlueRedGreenGreenRedRedRed PrintRedL BlueWhite Print
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand Tearable
Economy
TYPICAL
APPLICATIONS
Mounting Glass &
Clear Plastics,
Display Fabrication
Signs and Displays
Acrylic & Glass
Fabricators
Acrylic, Glass
Plastic Bonding
Signage & Display
Glass and
Showerscreen
Illuminated Signage
Shopfitting
Panel Bonding
Signs, Electronics
Panel Bonding &
Mounting Metal
Fabrication
Mounting ACP
Structural
Bonding Signage
Sign and Display
Plastic
Extrusions
Signage Low
Surface Energy
Surfaces
Coach Building
Transport/ Marine
Metal Fabrication
Trim Mounting
Structural Bonds
Metal Fabrication
Aluminium
Composite Panel
– Structural
Mounting to Clear
Surfaces, Graphics
& Premium Signage
Temporary Signage
P.O.S. Exhibition
Display
Heat Sink Lighting
and Electronics
Switchboard
Product CodeK5901K5929K5930K5931K5932
Backing / AppearanceOff WhiteBlackBlackBlackBlack
Adhesive TypeButylButylButylButylButyl
Gauge mm10.450.612
Temp Continuous °C-30 to 80-30 to 80-30 to 80-30 to 80-30 to 8
Peel Adhesion N/Cm17.69.19.810.513.6
Liner TypePE PaperPE PaperPE PaperPE PaperPE Paper
Liner ColourWhiteWhiteKraftKraftKraft
Smooth Bond
Non Smooth Bond
Very Uneven
Low Energy Surface
Initial Tack
Shear Adhesion
UV Resistance
Plasticiser Resistance
Moisture Stability
Chemical Resistance
Differential Expansion
Impact Resistance
Ageing Resistance
Clean Remove / Release
Clarity
Hand Tearable
Economy
TYPICAL
APPLICATIONS
Cold Storage
Marine Gaskets
Hydroponic Liners
Moisture/Vapour
Seals, attachment
LSE Surfaces
Waterproofing,
Sealing, Roofing
& Construction
Membrane Repair
Weather Proofing
Joining PE Liners
Road Traffic
Markers, Sealing
Vibration Proof